%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Masters/Doctoral Thesis
% LaTeX Template
% Version 1.43 (17/5/14)
%
% This template has been downloaded from:
% http://www.LaTeXTemplates.com
%
% Original authors:
% Steven Gunn
% http://users.ecs.soton.ac.uk/srg/softwaretools/document/templates/
% and
% Sunil Patel
% http://www.sunilpatel.co.uk/thesis-template/
%
% License:
% CC BY-NC-SA 3.0 (http://creativecommons.org/licenses/by-nc-sa/3.0/)
%
% Note:
% Make sure to edit document variables in the Thesis.cls file
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%----------------------------------------------------------------------------------------
% PACKAGES AND OTHER DOCUMENT CONFIGURATIONS
%----------------------------------------------------------------------------------------
\documentclass[11pt, twoside,openright]{Thesis} % The default font size and one-sided printing (no margin offsets)
\renewcommand{\contentsname}{Table of Contents}
\graphicspath{{Pictures/}} % Specifies the directory where pictures are stored
\usepackage[square, numbers, comma, sort&compress]{natbib} % Use the natbib reference package - read up on this to edit the reference style; if you want text (e.g. Smith et al., 2012) for the in-text references (instead of numbers), remove 'numbers'
\usepackage{amsmath}
%\usepackage{amssymb}
\usepackage{graphicx}
%\usepackage{indentfirst}
%\usepackage{setspace}
%\doublespacing
%\usepackage{cite}
%\usepackage{hyperref}
%\usepackage{float}
\usepackage{notoccite}
%\usepackage{epstopdf}
%\usepackage{graphicx}
\usepackage{caption}
\usepackage{subcaption}
\usepackage{tabu}
\usepackage{multirow}
\usepackage{longtable}
\usepackage{pdflscape}
\usepackage{array}
\usepackage{pifont}
\usepackage{hhline}
\usepackage{textcomp}
%\usepackage{gensymb}
\usepackage{breqn}
\usepackage{rotating}
\usepackage{float}
\usepackage[ruled,vlined,linesnumbered]{algorithm2e}
\hypersetup{urlcolor=blue, colorlinks=true} % Colors hyperlinks in blue - change to black if annoying
\title{\ttitle} % Defines the thesis title - don't touch this
\begin{document}
\frontmatter % Use roman page numbering style (i, ii, iii, iv...) for the pre-content pages
\setstretch{1.3} % Line spacing of 1.3
% Define the page headers using the FancyHdr package and set up for one-sided printing
\fancyhead{} % Clears all page headers and footers
\rhead{\thepage} % Sets the right side header to show the page number
\lhead{} % Clears the left side page header
\pagestyle{fancy} % Finally, use the "fancy" page style to implement the FancyHdr headers
\newcommand{\HRule}{\rule{\linewidth}{0.5mm}} % New command to make the lines in the title page
% PDF meta-data
\hypersetup{pdftitle={\ttitle}}
\hypersetup{pdfsubject=\subjectname}
\hypersetup{pdfauthor=\authornames}
\hypersetup{pdfkeywords=\keywordnames}
%----------------------------------------------------------------------------------------
% TITLE PAGE
%----------------------------------------------------------------------------------------
%\begin{titlepage}
%\begin{center}
%
%\textsc{\LARGE \univname}\\[1.5cm] % University name
%\textsc{\Large Doctoral Thesis}\\[0.5cm] % Thesis type
%
%\HRule \\[0.4cm] % Horizontal line
%{\huge \bfseries \ttitle}\\[0.4cm] % Thesis title
%\HRule \\[1.5cm] % Horizontal line
%
%\begin{minipage}{0.4\textwidth}
%\begin{flushleft} \large
%\emph{Author:}\\
%\href{http://www.johnsmith.com}{\authornames} % Author name - remove the \href bracket to remove the link
%\end{flushleft}
%\end{minipage}
%\begin{minipage}{0.4\textwidth}
%\begin{flushright} \large
%\emph{Supervisor:} \\
%\href{http://www.jamessmith.com}{\supname} % Supervisor name - remove the \href bracket to remove the link
%\end{flushright}
%\end{minipage}\\[3cm]
%
%\large \textit{A thesis submitted in fulfilment of the requirements\\ for the degree of \degreename}\\[0.3cm] % University requirement text
%\textit{in the}\\[0.4cm]
%\groupname\\\deptname\\[2cm] % Research group name and department name
%
%{\large \today}\\[4cm] % Date
%%\includegraphics{Logo} % University/department logo - uncomment to place it
%
%\vfill
%\end{center}
%
%\end{titlepage}
%----------------------------------------------------------------------------------------
% DECLARATION PAGE
% Your institution may give you a different text to place here
%----------------------------------------------------------------------------------------
%\Declaration{
%
%\addtocontents{toc}{\vspace{1em}} % Add a gap in the Contents, for aesthetics
%
%I, \authornames, declare that this thesis titled, '\ttitle' and the work presented in it are my own. I confirm that:
%
%\begin{itemize}
%\item[\tiny{$\blacksquare$}] This work was done wholly or mainly while in candidature for a research degree at this University.
%\item[\tiny{$\blacksquare$}] Where any part of this thesis has previously been submitted for a degree or any other qualification at this University or any other institution, this has been clearly stated.
%\item[\tiny{$\blacksquare$}] Where I have consulted the published work of others, this is always clearly attributed.
%\item[\tiny{$\blacksquare$}] Where I have quoted from the work of others, the source is always given. With the exception of such quotations, this thesis is entirely my own work.
%\item[\tiny{$\blacksquare$}] I have acknowledged all main sources of help.
%\item[\tiny{$\blacksquare$}] Where the thesis is based on work done by myself jointly with others, I have made clear exactly what was done by others and what I have contributed myself.\\
%\end{itemize}
%
%Signed:\\
%\rule[1em]{25em}{0.5pt} % This prints a line for the signature
%
%Date:\\
%\rule[1em]{25em}{0.5pt} % This prints a line to write the date
%}
%
%\clearpage % Start a new page
%%----------------------------------------------------------------------------------------
%% QUOTATION PAGE
%%----------------------------------------------------------------------------------------
%
%\pagestyle{empty} % No headers or footers for the following pages
%
%\null\vfill % Add some space to move the quote down the page a bit
%
%\textit{``Thanks to my solid academic training, today I can write hundreds of words on virtually any topic without possessing a shred of information, which is how I got a good job in journalism."}
%
%\begin{flushright}
%Dave Barry
%\end{flushright}
%
%\vfill\vfill\vfill\vfill\vfill\vfill\null % Add some space at the bottom to position the quote just right
%
%\clearpage % Start a new page
%
%%----------------------------------------------------------------------------------------
%% ABSTRACT PAGE
%%----------------------------------------------------------------------------------------
%
%\addtotoc{Abstract} % Add the "Abstract" page entry to the Contents
%
%\abstract{\addtocontents{toc}{\vspace{1em}} % Add a gap in the Contents, for aesthetics
%
%The Thesis Abstract is written here (and usually kept to just this page). The page is kept centered vertically so can expand into the blank space above the title too\ldots
%}
%
%\clearpage % Start a new page
%%----------------------------------------------------------------------------------------
%% ACKNOWLEDGEMENTS
%%----------------------------------------------------------------------------------------
%
%\setstretch{1.3} % Reset the line-spacing to 1.3 for body text (if it has changed)
%
%\acknowledgements{\addtocontents{toc}{\vspace{1em}} % Add a gap in the Contents, for aesthetics
%
%The acknowledgments and the people to thank go here, don't forget to include your project advisor\ldots
%}
%\clearpage % Start a new page
\input{cover_asu}
%\newpage
%\thispagestyle{empty}
%\mbox{}
\input{committee}
%\newpage
%\thispagestyle{empty}
%\mbox{}
\input{statement}
%\newpage
%\thispagestyle{empty}
%\mbox{}
\input{cv}
%\newpage
%\thispagestyle{empty}
%\mbox{}
\input{abstract}
%\newpage
%\thispagestyle{empty}
%\mbox{}
\input{summary}
%\newpage
%\thispagestyle{empty}
%\mbox{}
\input{Acknowledgment}
%----------------------------------------------------------------------------------------
% LIST OF CONTENTS/FIGURES/TABLES PAGES
%----------------------------------------------------------------------------------------
\clearpage
\pagestyle{fancy} % The page style headers have been "empty" all this time, now use the "fancy" headers as defined before to bring them back
%\phantomsection
\lhead{\emph{Table of Contents}} % Set the left side page header to "Table of Contents"
\tableofcontents % Write out the Table of Contents
\clearpage
\lhead{\emph{List of Figures}} % Set the left side page header to "List of Figures"
\listoffigures % Write out the List of Figures
\clearpage
\lhead{\emph{List of Tables}} % Set the left side page header to "List of Tables"
\listoftables % Write out the List of Tables
\clearpage
\phantomsection
\lhead{\emph{List of Algorithms}}
\addtotoc{List of Algorithms}
\listofalgorithms
%----------------------------------------------------------------------------------------
% ABBREVIATIONS
%----------------------------------------------------------------------------------------
\clearpage % Start a new page
%\setstretch{1.5} % Set the line spacing to 1.5, this makes the following tables easier to read
\lhead{\emph{List of Abbreviations}} % Set the left side page header to "List of Abbreviations"
\clearpage
\listofsymbols{ll} % Include a list of Abbreviations (a table of two columns)
{
\textbf{LAH} & \textbf{L}ist \textbf{A}bbreviations \textbf{H}ere \\
%\textbf{Acronym} & \textbf{W}hat (it) \textbf{S}tands \textbf{F}or \\
}
%----------------------------------------------------------------------------------------
% PHYSICAL CONSTANTS/OTHER DEFINITIONS
%----------------------------------------------------------------------------------------
%\clearpage % Start a new page
%
%\lhead{\emph{Physical Constants}} % Set the left side page header to "Physical Constants"
%
%\listofconstants{lrcl} % Include a list of Physical Constants (a four column table)
%{
%Speed of Light & $c$ & $=$ & $2.997\ 924\ 58\times10^{8}\ \mbox{ms}^{-\mbox{s}}$ (exact)\\
%% Constant Name & Symbol & = & Constant Value (with units) \\
%}
%----------------------------------------------------------------------------------------
% SYMBOLS
%----------------------------------------------------------------------------------------
\clearpage % Start a new page
\lhead{\emph{List of Symbols}} % Set the left side page header to "List of Symbols"
\listofnomenclature{lll} % Include a list of Symbols (a three column table)
{
$a$ & distance & m \\
$P$ & power & W (Js$^{-1}$) \\
% Symbol & Name & Unit \\
& & \\ % Gap to separate the Roman symbols from the Greek
$\omega$ & angular frequency & rads$^{-1}$ \\
% Symbol & Name & Unit \\
}
%----------------------------------------------------------------------------------------
% DEDICATION
%----------------------------------------------------------------------------------------
%
%\setstretch{1.3} % Return the line spacing back to 1.3
%
%\pagestyle{empty} % Page style needs to be empty for this page
%
%\dedicatory{For/Dedicated to/To my\ldots} % Dedication text
%
%\addtocontents{toc}{\vspace{2em}} % Add a gap in the Contents, for aesthetics
%----------------------------------------------------------------------------------------
% THESIS CONTENT - CHAPTERS
%----------------------------------------------------------------------------------------
\mainmatter % Begin numeric (1,2,3...) page numbering
\pagestyle{fancy} % Return the page headers back to the "fancy" style
% Include the chapters of the thesis as separate files from the Chapters folder
% Uncomment the lines as you write the chapters
\input{Chapters/Chapter1}
\input{Chapters/Chapter2}
\input{Chapters/Chapter3}
\input{Chapters/Chapter4}
%\input{Chapters/Chapter5}
%\input{Chapters/Chapter6}
%\input{Chapters/Chapter7}
\addtocontents{toc}{\vspace{2em}} % Add a gap in the Contents, for aesthetics
%\backmatter
%----------------------------------------------------------------------------------------
% BIBLIOGRAPHY
%----------------------------------------------------------------------------------------
\cleardoublepage
\label{Bibliography}
\renewcommand{\bibname}{References}
\phantomsection
\addtotoc{References}
\lhead{\emph{References}} % Change the page header to say "References"
\bibliographystyle{unsrtnat} % Use the "unsrtnat" BibTeX style for formatting the Bibliography
\bibliography{Bibliography} % The references (bibliography) information are stored in the file named "Bibliography.bib"
%----------------------------------------------------------------------------------------
% THESIS CONTENT - APPENDICES
%----------------------------------------------------------------------------------------
\addtocontents{toc}{\vspace{2em}} % Add a gap in the Contents, for aesthetics
\appendix % Cue to tell LaTeX that the following 'chapters' are Appendices
% Include the appendices of the thesis as separate files from the Appendices folder
% Uncomment the lines as you write the Appendices
\input{Appendices/AppendixA}
%\input{Appendices/AppendixB}
%\input{Appendices/AppendixC}
\end{document}
