Tehzeeb Jafri - Teaching Resume
Author
umair
Last Updated
8 лет назад
License
Creative Commons CC BY 4.0
Аннотация
Tehzeeb Jafri's Teaching Résumé
Tehzeeb Jafri's Teaching Résumé
%%%%%%%%%%%%%%%%%
% This is an example CV created using altacv.cls (v1.1.3, 30 April 2017) written by
% LianTze Lim (liantze@gmail.com), based on the
% Cv created by BusinessInsider at http://www.businessinsider.my/a-sample-resume-for-marissa-mayer-2016-7/?r=US&IR=T
%
%% It may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License, either version 1.3
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%% http://www.latex-project.org/lppl.txt
%% and version 1.3 or later is part of all distributions of LaTeX
%% version 2003/12/01 or later.
%%%%%%%%%%%%%%%%
%% If you want to use \orcid or the
%% academicons icons, add "academicons"
%% to the \documentclass options.
%% Then compile with XeLaTeX or LuaLaTeX.
% \documentclass[10pt,a4paper,academicons]{altacv}
%% Use the "normalphoto" option if you want a normal photo instead of cropped to a circle
% \documentclass[10pt,a4paper,normalphoto]{altacv}
\documentclass[10pt,a4paper]{altacv}
%% AltaCV uses the fontawesome and academicon fonts
%% and packages.
%% See texdoc.net/pkg/fontawecome and http://texdoc.net/pkg/academicons for full list of symbols.
%% When using the "academicons" option,
%% Compile with LuaLaTeX for best results. If you
%% want to use XeLaTeX, you may need to install
%% Academicons.ttf in your operating system's font %% folder.
% Change the page layout if you need to
\geometry{left=1cm,right=9cm,marginparwidth=6.8cm,marginparsep=1.2cm,top=1cm,bottom=1cm}
% Change the font if you want to.
% If using pdflatex:
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage[default]{lato}
% If using xelatex or lualatex:
% \setmainfont{Lato}
% Change the colours if you want to
\definecolor{VividPurple}{HTML}{3E0097}
\definecolor{SlateGrey}{HTML}{2E2E2E}
\definecolor{LightGrey}{HTML}{666666}
\colorlet{heading}{VividPurple}
\colorlet{accent}{VividPurple}
\colorlet{emphasis}{SlateGrey}
\colorlet{body}{LightGrey}
% Change the bullets for itemize and rating marker
% for \cvskill if you want to
\renewcommand{\itemmarker}{{\small\textbullet}}
\renewcommand{\ratingmarker}{\faCircle}
%% sample.bib contains your publications
\addbibresource{sample.bib}
\begin{document}
\name{Tehzeeb Jafri}
\tagline{Professional Engineer \& Passionate Educator }
% Cropped to square from https://en.wikipedia.org/wiki/Marissa_Mayer#/media/File:Marissa_Mayer_May_2014_(cropped).jpg, CC-BY 2.0
\photo{2.5cm}{Teh.jpg}
\personalinfo{%
% Not all of these are required!
% You can add your own with \printinfo{symbol}{detail}
\email{tehzeebjafri1@gmail.com}
% \phone{000-00-0000}
\mailaddress{5310 Keswick Lane, Fort Wayne IN, 46835 U.S.A}
\location{\hspace{0.05cm} Citizen of United States} \hspace{0.14cm}
\phone{+1 (260) 241-2942} % I'm just making this up though.
% \orcid{orcid.org/0000-0000-0000-0000} % Obviously making this up too. If you want to use this field (and also other academicons symbols), add "academicons" option to \documentclass{altacv}
}
%% Make the header extend all the way to the right, if you want.
\begin{fullwidth}
\makecvheader
\end{fullwidth}
%% Provide the file name containing the sidebar contents as an optional parameter to \cvsection.
%% You can always just use \marginpar{...} if you do
%% not need to align the top of the contents to any
%% \cvsection title in the "main" bar.
\cvsection[page1sidebar]{Experience}
\cvevent{Instructor Mechanical Engineering Technology (MET)}{Indiana-University Purdue-University, Fort Wayne (IPFW)}{Sept 2013 -- Present}{Fort Wayne, Indiana U.S.A}
\begin{itemize}
\item \b Five \b years of teaching experience in mechanical engineering technology department. Taught instrumental process control, applied engineering statistics, digital \& analogue signals, quality, and electricity.
\item Planned, trained and evaluated students through a range of different methods including assignments, quizzes, exams, presentations, group projects, class participation and exams.
\item Participated in teacher training workshops and conferences, meeting and professional development seminars.
\item Effectively used teaching tools like Blackboard, SmartBoards, spreadsheets and
other engineering software.
\end{itemize}
\divider
\cvevent{Substitute Teacher Science \& Mathematic}{Fort Wayne Community Schools (FWCS)}{Jan 2014 -- Present}{Fort Wayne, Indiana U.S.A}
\begin{itemize}
\item Taught science, chemistry and mathematics to primary, middle and high school students as well as individuals with learning challenges and special needs within a mainstreamed, inclusive classroom.
\item Actively serving variety of schools and task forces focused on curriculum development, textbook review, fund-raising and anti-bullying efforts.
\end{itemize}
\divider
\cvevent{Math Teacher}{Ivy Tech Community College}{2013 -- 2013}{Fort Wayne, Indiana U.S.A}
\begin{itemize}
\item Designed and implemented interactive math lessons using new technologies for the school.
\item Taught Algebra, Trigonometry, Statistics, Advanced Algebra, Geometry, Math Enrichment and Calculus
\end{itemize}
\divider
\cvevent{Senior Test Engineer \& Lead Trainer (Automotive)}{Dana Corporation (ASG Technology Center)}{1999 -- 2009}{Toledo, Ohio U.S.A}
\begin{itemize}
\item Taught prototyping, design, and production testing validation of automotive axles, drive shafts and other related parts for GM, Toyota, Ford, Nissan, TATA and Chrysler.
\item Conducted gear testing on dynamometers and fatigue testing \& ultimate testing on Tinius Olsen tester. Analyzed fixed design testing on testing equipment.
\item Performed statistical analysis and Weibull analysis on test data. Created statistical plots, histograms, charts, plots and presented photographs of tests setups and fracture samples.
\item Analyzed and improved processes. Performed fatigue, beam, static torque, gear fatigue, deflection, hot/cold flow, and axle chatter tests.
\end{itemize}
\divider
\cvevent{Senior Test Engineer}{Essex Group Incorporated)}{1994 -- 1999}{Fort Wayne, Indiana U.S.A}
\begin{itemize}
\item Analyzed field quality and customer issues with motors, coils, and other automotive devises.
\item Performed magnet wire product testing, created detailed testing reports and provided recommendations to customers in a timely manner.
\item Provided testing data to marketing and sales departments for improve customer relationships and setting new target markets.
\item Obtained UL, ASTM, ISO and Federal specification approval.
\end{itemize}
% \divider
% \cvevent{Product Engineer}{Google}{23 June 1999 -- 2001}{Palo Alto, CA}
% \begin{itemize}
% \item Joined the company as employe \#20 and female employee \#1
% \item Developed targeted advertisement in order to use user's search queries and show them related ads
% \end{itemize}
\cvsection {Areas of Expertize}
{\printinfo{\faTv}{\large\textbf{Software Skills}}
\quad
\begin{itemize}
\item Microsoft Office 2016: Word, Excel, Power Point, One Note, Access and Project.
\item Advance Blackboard v10 and Canvas
\item Lotus notes, Spreadsheet and Databases.
\item MatLab and Mulit-Sim Circuit Analysis software.
\item Megadac Software, Dynamometer Programming and Flex Software.
\end{itemize}
\quad
{\printinfo{\faIndustry}{\large\textbf{Professional Engineering Skills}}
\quad
\begin{itemize}
\item Individual education plan development and project based learning experience for students.
\item TQM / ISO 9001 Training and Quality Assurance processes.
\item Magnet wire testing, customer support, ASTM, NEMA testing.
\item Developed and designed the patent for Hyslik-200 Magnet wire insulation.
\item Researching, analyzing and testing metals, chemicals and insulations.
\end{itemize}
\quad
{\printinfo{\faGroup}{\large\textbf{Soft Skills}}
\quad
\begin{itemize}
\item Strong communication and presentation skills.
\item Inspiring leadership and coaching skills.
\item Excellent problem solving skills.
\item Teamwork and collaboration skills.
\end{itemize}
\cvsection {Professional References}
\cvref{\ Azam Choudhdry, M.B.A}{mazamc@aoil.com}
{Fort Wayne Indiana, 46805}
\divider
\cvref{Dr.\ Barry Dupen, Ph.D}{dupenb@ipfw.edu}
{2101 E. Coliseum Blv, \ Fort Wayne Indiana, 46805}
\divider
\cvref{\ Mohammad Umair, M.S}{ujafri@outlook.com}
{\ Purdue University \\ Fort Wayne, Indiana 46802}
%% If the NEXT page doesn't start with a \cvsection but you'd
%% still like to add a sidebar, then use this command on THIS
%% page to add it. The optional argument lets you pull up the
%% sidebar a bit so that it looks aligned with the top of the
%% main column.
% \addnextpagesidebar[-1ex]{page3sidebar}
\end{document}