Ronak Dedhiya's CV
Author
Ronak Dedhiya
Last Updated
5 лет назад
License
Creative Commons CC BY 4.0
Abstract
Ronak Dedhiya's CV. Created with the AltaCV template.
Ronak Dedhiya's CV. Created with the AltaCV template.
%%%%%%%%%%%%%%%%%
% This is an example CV created using altacv.cls (v1.1.5, 1 December 2018) written by
% LianTze Lim (liantze@gmail.com), based on the
% Cv created by BusinessInsider at http://www.businessinsider.my/a-sample-resume-for-marissa-mayer-2016-7/?r=US&IR=T
%
%% It may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License, either version 1.3
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%% http://www.latex-project.org/lppl.txt
%% and version 1.3 or later is part of all distributions of LaTeX
%% version 2003/12/01 or later.
%%%%%%%%%%%%%%%%
%% If you are using \orcid or academicons
%% icons, make sure you have the academicons
%% option here, and compile with XeLaTeX
%% or LuaLaTeX.
% \documentclass[10pt,a4paper,academicons]{altacv}
%% Use the "normalphoto" option if you want a normal photo instead of cropped to a circle
% \documentclass[10pt,a4paper,normalphoto]{altacv}
\documentclass[10pt,a4paper,ragged2e]{altacv}
%% AltaCV uses the fontawesome and academicon fonts
%% and packages.
%% See texdoc.net/pkg/fontawecome and http://texdoc.net/pkg/academicons for full list of symbols. You MUST compile with XeLaTeX or LuaLaTeX if you want to use academicons.
% Change the page layout if you need to
\geometry{left=2cm,right=10cm,marginparwidth=6.8cm,marginparsep=1.2cm,top=1.25cm,bottom=1.25cm}
% Change the font if you want to, depending on whether
% you're using pdflatex or xelatex/lualatex
\ifxetexorluatex
% If using xelatex or lualatex:
\setmainfont{Carlito}
\else
% If using pdflatex:
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage[default]{lato}
\fi
% Change the colours if you want to
\definecolor{VividPurple}{HTML}{000000}
\definecolor{SlateGrey}{HTML}{2E2E2E}
\definecolor{LightGrey}{HTML}{2E2E2E}
\colorlet{heading}{VividPurple}
\colorlet{accent}{VividPurple}
\colorlet{emphasis}{SlateGrey}
\colorlet{body}{LightGrey}
% Change the bullets for itemize and rating marker
% for \cvskill if you want to
\renewcommand{\itemmarker}{{\small\textbullet}}
\renewcommand{\ratingmarker}{\faCircle}
%% sample.bib contains your publications
\addbibresource{sample.bib}
\begin{document}
\name{AMAAD ALI}
\tagline{Electrical Engineer}
% Cropped to square from https://en.wikipedia.org/wiki/Marissa_Mayer#/media/File:Marissa_Mayer_May_2014_(cropped).jpg, CC-BY 2.0
%\photo{3.3cm}{profile.jpg}
\personalinfo{%
% Not all of these are required!
% You can add your own with \printinfo{symbol}{detail}
\email{amaadali464@gmail.com}
% \phone{000-00-0000}
% \mailaddress{Address, Street, 00000 County}
\location{Rawalpindi, Pakistan}
% \homepage{marissamayr.tumblr.com/}
% \twitter{@marissamayer}
\linkedin{https://www.linkedin.com/in/amaad-ali-1a4b7b163/}
\github{+92302-5320346} % I'm just making this up though.
% \orcid{orcid.org/0000-0000-0000-0000} % Obviously making this up too. If you want to use this field (and also other academicons symbols), add "academicons" option to \documentclass{altacv}
}
%% Make the header extend all the way to the right, if you want.
\begin{fullwidth}
\makecvheader
\end{fullwidth}
%% Depending on your tastes, you may want to make fonts of itemize environments slightly smaller
\AtBeginEnvironment{itemize}{\small}
%% Provide the file name containing the sidebar contents as an optional parameter to \cvsection.
%% You can always just use \marginpar{...} if you do
%% not need to align the top of the contents to any
%% \cvsection title in the "main" bar.
\cvsection[page1sidebar]{Education}
\cvevent{National University of Science and Technology )}{June 2016 -- Present}{Islamabad, Pakistan}
\begin{itemize}
\item BS in Electrical Engineering
\smallskip
\item Cgpa = 3.78
\end{itemize}
\divider
\cvevent{PCIT satellite town}{May 2013 -- June 2015}{Rawalpinidi,Pakistan}
\begin{itemize}
\item Intermediate
\smallskip
\item perctange= 83\%
\end{itemize}
%\divider
\cvsection{Achievements}
\smallskip
\begin{itemize}
\item Placed in top 14\% in RSNA Pneumonia Detection Kaggle challenge
\smallskip
\item Placed in top 3\% in Digit Recognition Challenge using One-Shot Learning
\smallskip
\item Winner at Samsung SMS Classification Hackathon
\smallskip
\item Placed in top 5\% in "Predict the Happiness" Hackerearth Challenge
\smallskip
\item Secured AIR 1232 in GATE 2017
\end{itemize}
\cvsection{SKILLS}
\cvskill{C++, Python, Keras, Unix}{5}
%\divider
\cvskill{Tensorflow, Pytorch, Darknet}{4}
% \divider
%\cvskill{German}{3}
\cvsection{Education / Courses}
\cvevent{Deep Learning Specialization}{Coursera}{ June 2017 -- Aug 2017}{}
%\divider
\cvevent{Bachelor of Technology}{Vivekanand Education Society Institute of Technology}{ June 2012 -- May 2016}{}
% \divider
% \cvevent{Product Engineer}{Google}{23 June 1999 -- 2001}{Palo Alto, CA}
% \begin{itemize}
% \item Joined the company as employe \#20 and female employee \#1
% \item Developed targeted advertisement in order to use user's search queries and show them related ads
% \end{itemize}
%\cvsection{A Day of My Life}
% Adapted from @Jake's answer from http://tex.stackexchange.com/a/82729/226
% \wheelchart{outer radius}{inner radius}{
% comma-separated list of value/text width/color/detail}
% Some ad-hoc tweaking to adjust the labels so that they don't overlap
% \wheelchart{1.5cm}{0.5cm}{%
% 10/10em/accent!30/Sleeping \& dreaming about work,
% 25/9em/accent!60/Public resolving issues with Yahoo!\ investors,
% 5/13em/accent!10/\footnotesize\\[1ex]New York \& San Francisco Ballet Jawbone board member,
% 20/15em/accent!40/Spending time with family,
% 5/8em/accent!20/\footnotesize Business development for Yahoo!\ after the Verizon acquisition,
% 30/9em/accent/Showing Yahoo!\ employees that their work has meaning,
% 5/8em/accent!20/Baking cupcakes
% }
\clearpage
% \cvsection[page2sidebar]{Publications}
\nocite{*}
% \printbibliography[heading=pubtype,title={\printinfo{\faBook}{Books}},type=book]
% \divider
% \printbibliography[heading=pubtype,title={\printinfo{\faFileTextO}{Journal Articles}}, type=article]
% \divider
% \printbibliography[heading=pubtype,title={\printinfo{\faGroup}{Conference Proceedings}},type=inproceedings]
% %% If the NEXT page doesn't start with a \cvsection but you'd
% %% still like to add a sidebar, then use this command on THIS
% %% page to add it. The optional argument lets you pull up the
% %% sidebar a bit so that it looks aligned with the top of the
% %% main column.
% % \addnextpagesidebar[-1ex]{page3sidebar}
\end{document}