Raj's Resume
Author:
Yash Raj
Last Updated:
5 лет назад
License:
Creative Commons CC BY 4.0
Аннотация:
Yash Raj's resume. Created with the AltaCV template.
\begin
Discover why 18 million people worldwide trust Overleaf with their work.
Yash Raj's resume. Created with the AltaCV template.
\begin
Discover why 18 million people worldwide trust Overleaf with their work.
%%%%%%%%%%%%%%%%%
% This is an sample CV template created using altacv.cls
% (v1.1.4, 27 July 2018) written by LianTze Lim (liantze@gmail.com). Now compiles with pdfLaTeX, XeLaTeX and LuaLaTeX.
%
%% It may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License, either version 1.3
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%% http://www.latex-project.org/lppl.txt
%% and version 1.3 or later is part of all distributions of LaTeX
%% version 2003/12/01 or later.
%%%%%%%%%%%%%%%%
%% If you need to pass whatever options to xcolor
\PassOptionsToPackage{dvipsnames}{xcolor}
%% If you are using \orcid or academicons
%% icons, make sure you have the academicons
%% option here, and compile with XeLaTeX
%% or LuaLaTeX.
% \documentclass[10pt,a4paper,academicons]{altacv}
%% Use the "normalphoto" option if you want a normal photo instead of cropped to a circle
% \documentclass[10pt,a4paper,normalphoto]{altacv}
\documentclass[10pt,a4paper]{altacv}
%% AltaCV uses the fontawesome and academicon fonts
%% and packages.
%% See texdoc.net/pkg/fontawecome and http://texdoc.net/pkg/academicons for full list of symbols.
%%
%% Compile with LuaLaTeX for best results. If you
%% want to use XeLaTeX, you may need to install
%% Academicons.ttf in your operating system's font
%% folder.
% Change the page layout if you need to
\geometry{left=1cm,right=9cm,marginparwidth=6.8cm,marginparsep=1.2cm,top=1.25cm,bottom=1.25cm,footskip=2\baselineskip}
% Change the font if you want to.
% If using pdflatex:
\usepackage[T1]{fontenc}
\usepackage[utf8]{inputenc}
\usepackage[default]{lato}
% If using xelatex or lualatex:
% \setmainfont{Lato}
% Change the colours if you want to
\definecolor{Mulberry}{HTML}{72243D}
\definecolor{SlateGrey}{HTML}{2E2E2E}
\definecolor{LightGrey}{HTML}{666666}
\colorlet{heading}{Sepia}
\colorlet{accent}{Mulberry}
\colorlet{emphasis}{SlateGrey}
\colorlet{body}{LightGrey}
% Change the bullets for itemize and rating marker
% for \cvskill if you want to
\renewcommand{\itemmarker}{{\small\textbullet}}
\renewcommand{\ratingmarker}{\faCircle}
%% sample.bib contains your publications
\addbibresource{sample.bib}
\usepackage[colorlinks]{hyperref}
\begin{document}
\name{YASH RAJ}
\tagline{Pre Final Year, Electronics and Communication Engineering}
\photo{2.8cm}{Globe_High}
\personalinfo{%
% Not all of these are required!
% You can add your own with \printinfo{symbol}{detail}
\email{yashr2192@gmail.com }
\phone{(+91)7488420275}
\mailaddress{IIT(ISM), Sardar Patel Nagar, Dhanbad, 826004}
\location{Jharkhand ,India}
% \homepage{www.homepage.com}
% \twitter{@twitterhandle}
\linkedin{linkedin.com/in/yash-raj-579b96156/}
\github{github.com/devrra}
%% You MUST add the academicons option to \documentclass, then compile with LuaLaTeX or XeLaTeX, if you want to use \orcid or other academicons commands.
% \orcid{orcid.org/0000-0000-0000-0000}
}
%% Make the header extend all the way to the right, if you want.
\begin{fullwidth}
\makecvheader
\end{fullwidth}
%% Depending on your tastes, you may want to make fonts of itemize environments slightly smaller
% \AtBeginEnvironment{itemize}{\small}
%% Provide the file name containing the sidebar contents as an optional parameter to \cvsection.
%% You can always just use \marginpar{...} if you do
%% not need to align the top of the contents to any
%% \cvsection title in the "main" bar.
\cvsection[page1sidebar]{Experience}
\cvevent{Participant}{Invent@IITGN}{May 2019 -- June 2019}{Gandhinagar, Gujarat}
\begin{itemize}
\item Controlled Insulin Injection Device, Design, Implementation
\item Designing components of the device, 3D printing, developing automated functionality on Arduino Mega, designing custom arduino-shield for the device.
\end{itemize}
\cvsection{Projects}
\cvevent{WayMart}{HackFest'19 @ IIT Dhanbad}{March 2019}{}
\begin{itemize}
\item A self-checkout cart that generates bill/invoice of items put in the cart automatically, eliminating long, time-consuming queues in marts.
\item Used low frequency RFID technology with custom-built receiver antenna to detect items.
\end{itemize}
\divider
\cvevent{Autonomous Drone}{eYantra Lab}{November 2018 - February 2019}{}
\begin{itemize}
\item Developed an autonomous flight control system using PID control technique on Pluto drone using ROS-kinetic and Vrep.
\end{itemize}
\divider
\cvevent{Real Track}{}{May 2018 - June 2018}{}
\begin{itemize}
\item A system to collect real-time motion specific data from a mobile robot(using MPU6050) via the internet (MQTT protocol) using extended-C and python.
\end{itemize}
\medskip
\cvsection{Achievements}
% Adapted from @Jake's answer from http://tex.stackexchange.com/a/82729/226
% \wheelchart{outer radius}{inner radius}{
% comma-separated list of value/text width/color/detail}
\begin{itemize}
\item Secured 1st Position in Walmart Self-Checkout Cart Challenge at Hackfest 2019, IIT Dhanbad.
\end{itemize}
\end{document}